2/3/4/5/6 DOF Mechanical Arm Steering Gear Bracket Mechanical Claw for Robotic

2 DOF Mechanical Arm Steering Gear Bracket 2 Axis Mechanical Claw (no servo) 

2 DOF mechanical claw, you can hand-held or stationary use, suitable for installation in small robot car, or four feet, six feet, humanoid robot

Checklist:
Multifunctional Bracket *1
L-shaped bracket *1
Long U Bracket *1
Metal rudder plate *2
Mechanical claw clip holding *1
Bushing bearing *1 
screw nut 

3 DOF Mechanical Arm Claw Steering Gear Bracket 3 Axis with Gripper (no servo) 

1. 3-DOF manipulator! Vertical arm up and down, back and forth 

2. U-bracket on the arm can be mounted directly on the base in the car or any other desktop platform 

3. The vehicle type 3-DOF manipulator medium length, back and forth up and down, in which a mechanical claw opening and closing of the steering gear control, two servo control arm up and down back and forth. This robot is particularly suitable as a vehicle manipulator robot car, grab the ball, catch the car are particularly good, very suitable for their own DIY or robotic smart car racing. Activities can use 180 degree steering joints. 

4. Mechanical parameters:
1>. turning radius: 240mm
2>. height: 290mm (gripper closed)
3>. the front clamp maximum opening: 55mm 

5. It is need 3 Metal rudder 

6.Material: 2mm thick 60 Series Hard aluminum

7. Checklist:
1>. Multifunction steering bracket *2
2>. Long U-shaped bracket *2
3>. A shaped bracket *1
4>. Cup bearing *2
5>. Alloy mechanical gripper *1 
6>. screw nut


4 DOF Mechanical Arm Steering Gear Bracket 4 Axis Mechanical Claw (no servo) 

NOTE :This product contains a full set of stand accessories, but does not include servos!! We will send the items to you with tracking number for free.

4-DOF manipulator vehicle type, length 310mm, especially suitable as a vehicle manipulator robot car. Up and down, back and forth, claws can rotate crawl. This section arm can be fixed in the car chassis, catch the ball, ah, ah grasping small boxes are particularly good, very suitable for their own DIY or robotic smart car racing. Joint activities all use 180 degree steering. 

Material:
2mm thick 60 Series Hard aluminum

Checklist:
Multifunction steering bracket *3
Long U-shaped bracket *2
L Bracket *1
Cup bearing *2 
Alloy mechanical claw *1
Metal rudder plate *4
Screw nut Installation Guide

5 DOF Mechanical Arm 3D Rotation 5 Axis Steering Gear Bracket Mechanical Claw (no servo) 

Mechanical parameters:
1, the rotation angle of 180 degrees
2, the turning radius: 275mm
3, height: 360mm (gripper closed)
4, gripping the front of the maximum opening: 55mm
5, gripping the widest distance: 98mm

Material:
2mm thick 60 Series Hard aluminum

Checklist :
Multifunction steering bracket *4
Long U-shaped bracket *3
Cup bearing *3
Alloy mechanical claw *1
U beam *3
Metal rudder plate *5
Screw nut


6 DOF Mechanical Arm 3D Rotation 6 Axis Steering Gear Bracket Mechanical Claw (no servo) 

NOTE :This product contains a full set of stand accessories, but does not include servos!!!! We will send the items to you with tracking number for free.

Mechanical parameters: 
1, the rotation angle of 180 degrees
2, the turning radius: 355mm
3, height: 460mm (gripper closed)
4, gripping the front of the maximum opening: 55mm
5, gripping the widest distance: 98mm 

Material:
2mm thick 60 Series Hard aluminum

Package List: 
Multifunction steering bracket *5
Long U-shaped bracket *4
L Bracket *1
Cup bearing *4
Alloy mechanical claw *1
U beam *3
Metal rudder plate *6
screw nut