APM2.6 Flight Controller Board Straight Pin Connector for ARDUPILOT MEGA 2.6

Description

Features:

Arduino Compatible

Includes 3-axis gyro, accelerometer , along with a high-performance barometer

On-board 4 MegaByte Dataflash chip for automatic datalogging

Optional off-board GPS

One of the first open source autopilot systems to use Invensense's 6 DoF Accelerometer/Gyro MPU-6000.

Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.

Atmel's ATMEGA2560 and ATMEGA32U-2 chips for processing and USB functions respectively.

 

Specifications:

APM size:70*44*14mm

Cable length:232mm

Net weight:32g

Package weight: 42g

 

Package :

1 x ArduPilot Mega APM2.6

CRIUS MultiWii AIO PRO V2.0 MWC Pirate Flight Controller Airplane Multirotor

CRIUS All IN ONE PRO Flight Controller V2.0 Lastest Ver Pirate/MWC/ArduPlaneNG MultiWii

Description:

CRIUS All IN ONE PRO Flight Controller V2.0 Lastest Ver Pirate/MWC/ArduPlaneNG MultiWii
Features:
- Supported MegaPirateNG/ ArduCopterNG，/ArduPlaneNG/MultiWii/AeroQuadand firmware
- Up to 8-axis motor output
- 8 input channels for standard receiver and PPM SUM
- 4 serial ports for debug/Bluetooth Module/OSD/GPS/telemetry
- 2 servos output for PITCH and ROLL gimbal system
- A servos output to trigger a camera button
- 6 Analog output for extend device
- A I2C port for extend sensor or device
- Separate 3.3V and 5V LDO voltage regulator
- Built-in 16Mbit data flash memory chip to record the data automatically 
- ATMega 2560-16AU Microcontroller
- MPU6050 6 axis gyro/accel with Motion Processing Unit
- HMC5883L 3-axis digital magnetometer
- MS5611-01BA01 highprecision altimeter
- FT232RQ USB-UART chip and Micro USB receptacle
- On board logic level converter
- Match the standard of RoHS

- Flight mode for Multiwii

  One of the following basic mode
  - Acro
  - Level
  - Alt Hold
  - Head Lock
  - Optional mode
  - HeadFree (CareFree)
  - GPS Hold (Need GPS receiver or Extend Board)
  - GPS Back to home position (Need GPS receiver or Extend Board)

- Flight mode for MegaPirate
 - Acro
 - Alt Hold
 - Simple
 - Loiter (uses GPS)
 - Guided (uses GPS)
 - Position (uses GPS)
 - Circle (uses GPS)
 - RTL (uses GPS)
 - Auto(uses GPS)
 - Follow Me(uses GPS)

- Input power selection
- One of the following way
  - Connect 5V power cable from ESC or UBEC to the ESC/Servo port, the J1 jumper must be closed.
  - Connect 5V~12V power cable to the extend power port, the J1 jumper must be removed.
   When using Extend Board, AIO PRO must be powered from the extend power port.

General:

- Dimension: 50mmX50mm
- Height: 11.6mm
- Weight: 14.2g
- Fixing hole spacing: 45mm
- Hole diameter: 3.1mm

Package included:

- CRIUS AIO PRO v1.0 Flight Control×1
- JR/3P－3P cable×1
- JR/3P－1P×3 cable×3
- 1.25mm 4P cable×1
- 1.25mm 6P cable×2
- 1.25mm 8P cable×1
Note: not included Micro USB cable.

Brand New Quadcopter Replacement Parts Frame Arm For DJI F450 High Quality

1pcs 450 Replacement Frame Arm Parts For DJI F450 F550 Flamewheel
1Qudcopter Multicopter F450 Frame Arm for DJI F450 F550 Flamewheel Part


Features:
Color: Red
Usage: suitable for the DJI F450 F550 flamewheel Frame Arm Part
The F450 F550 FlameWheel frame arms are built from very strong materials
Provides better resistance to damage on hard landings



Package Included:
1 X Qudcopter Multicopter F450 F550 Frame Arm

DC 12V 0.4N Push-Pull Open Frame Solenoid Electromagnet Electric Magnet Hold new

Description :

DC 12V 0.4N Push-Pull Open Frame Solenoid Electric Magnet Holding

This solenoid electric magnet is suitable for vending machines, office facility, transport equipment, appliances and so on.
It can be fixed and connet load easily, heat up stablely so as prolong life of product and ensure good performance.

Specification :

Input Voltage : 12V DC
Holding Force : 0.4N
Operating Temperature : -5 - 40℃ non-condensing
Operating Humidity : relative humidity 45%-85% non-condensing
Saving Temperature : -45 - 75℃ non-condensing
Saving Humidity : relative humidity 0%-95% non-condensing

Stroke : 10mm
Fram Size : 3(L)x1.2(W)x1.5(H)cm
Lead Length : 20cm
Material:Metal, Electronic Parts


Package Included :

1x DC 12V 0.4N Push-Pull Open Frame Solenoid Electric Magnet

metal gear motors 3V 6V 12V 24V DC gear motor high torque low noise

100% Brand new and high quality
Suitable voltage: 3v 6v 12V-24V
Speed: 10-20-40-80 RPM /min
Weight: 500 g
Model: DC motor RS-555
Rated voltage : DC12V
No-load speed :3000-3500 r/min  or so
Rated voltage : DC24V
No-load speed :7000-8000 r/min 
Shaft Length : 16mm
Load Current : 0.8A ( starting current 1.3A)
Rated Current : 2.5A.
Weight : 0.30KG
Dimensions: Diameter 38mm, length 57mm
Pls note that: Surface scratches, oxidation, if you are not happy with this, pls do not buy it!
But its quality is very good with such low price!!!
Package included:
1x TAKANAWA 555 metal gear motors 3V 6V 12V 24V DC gear motor high torque low noise